Perma Marble Tile Adhesive is a cementitious polymer based material in white powder form, which only needs on site addition of water to make a paste which is used for fixing marble slabs, marble tiles to cementitious surfaces vertical as well as horizontal and glass mosaic tiles.
Perma Marble Tile Adhesive (MTA) is especially developed for fixing marble slabs and tiles. Marble is generally loose grained and has a porous structure. Ordinary adhesives and grey cements have a tendency to leach into the marble surface with time and stain the surface. Because of this reason even the best selected marble shows the signs of becoming dull and grey and yellow very soon. Perma Marble Tile Adhesive not only helps in scientific fixing of the marbles, but also helps in maintaining the same luster of marble for years and years. Perma Marble Tile Adhesive makes the tiled area waterproof.
DIRECTIONS FOR USE
Ensure that the surface to be tiled is clean and free from dust, dirt, grease etc. Mix MTA with clean water in the proportion of 3.5 volumes of powder to 1 volume of water. Mix till a uniform consistency, smooth white paste is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any, to escape and remix the paste. Apply the paste uniformly on to the surface to be tiled as well as on the back of the marble and press the marble in position. While using MTA wetting of the marbles or the surface to be tiled or curing is not required. Fill the tile joints with Uniwhite Perma C-Tone Filler after 24 hours of tile laying.
Easy to use.
No wetting of surface to be tiled.
Makes the tiled area waterproof.
Maintains the original lustre of the marbles for years.
Perma Marble Tile Adhesive is specially developed for fixing
Can be used for fixing tile over tile.
marbles and glass mosaic tiles.
|Pot Life Of Paste
||45 min at 35°C
||Free flowing powder
One kg of Perma Marble Tile Adhesive yields a white paste of 600 cc. If marble tiles are fixed with a uniform bed thickness of 2mm of adhesive then one kg of Perma Marble Tile Adhesive can fix marbles on an area of 3.22 Sft.
All equipment and tools must be cleaned immediately after use with water or Cleaning Solvents as the case may be. Similar procedures should be adopted for break periods exceeding 15 minutes.
Perma Marble Tile Adhesive is available in 10 Kg and 25 Kg multi-wall laminated sacks.
Perma Marble Tile Adhesive has a shelf life of 12 months if stored in Manufacturer’s original packing in a cool and dry place away from moisture and heat.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.