Perma Paver Coat creates a deep penetrating barrier coating which protects and improves surfaces by bringing out richness in the color of tiles, stones, slates etc. It provides a protective barrier on porous surfaces which resists chemical attack and eliminates dusting.
Perma Paver Coat is a one pack colourless Acrylic coating which provides integral protection to paver blocks, tiles, slates etc.
Perma Paver Coat penetrates the capillary structure and provides a tough and clear protection.
Perma Paver Coat is UV resistant.
Perma Paver Coat on curing forms a glossy film.
Perma Paver Coat is resistant to oil, grease and stains.
Perma Paver Coat is free from water.
Perma Paver Coat can be applied by even unskilled labourers.
Perma Paver Coat can be used for paver blocks, interlocking pavers, natural stones and slates.
DIRECTION FOR USE
Perma Paver Coat can be applied with a hard sponge or a soft brush. One coat will seal, protect and make surface dust free. Additional coats will enhance gloss. Apply second coat after the first coat has dried off.
Do not apply Paver coat during bad weather or in direct sunlight.
Paver Coat will dry to tack free within 30 to 40 minutes depending upon temperatures and ventilation.
||0°C to 60°C
||0.8 at 20°C
||-25 seconds on ford cup No.4 @ 20°C
Ensure adequate ventilation during application.
Perma Paver Coat will give a coverage of 40 sq.ft / 1 ltr for single coat. Normally two coats are recommended.
HEALTH AND SAFETY
Perma Paver Coat has a low toxicity, but avoid ingestion. Do not induce vomiting if swallowed and seek immediate medical attention. Wear protective gloves during handling and remove splashes on skin with soap water. Wear goggles and in the event of splashes wash eyes with copious amount of water for 10-15 minutes. Ensure adequate ventilation.
PACKING AND STORAGE
Perma Paver Coat is available in 10 ltr,25 ltr,100 ltr, & 200 ltr containers. Perma Paver Coat can be stored between 10°C and 45°C. Preferably store at below 25°C. Keep away from sources of ignition and foodstuffs.
Perma Paver Coat best results use before 12 months in unopened condition.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.