Perma Plast PC-300 is a high range plasticizing and slum retaining admixture of use in temperate zones where workability retention is important on concreting sites. Perma Plast PC-300 is recommended in production of high strength concrete.
Perma Plast PC-300 is recommended in production of high strength concrete in elevated temperatures and in areas slump retention is desired.
Perma Plast PC-300 is recommended in hot weather concreting where a workability retention over long periods are required.
Perma Plast PC-300 is recommended in pile foundations, bridge girders, caissons high rise structures and such structures where quality of concrete is of prime importance.
Perma Plast PC-300 is suitable for use with all types aggregates and cements and in all weathers.
Perma Plast PC-300 maintains the workability over long periods.
Perma Plast PC-300 is compatible with all types of cements including puzzolonic and fly ash / slag cements.
Perma Plast PC-300 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
Perma Plast PC-300 enables production of dense impermeable and fair finish concrete.
Perma Plast PC-300 helps in production of good quality of concrete continuously.
DIRECTIONS FOR USE
Perma Plast PC-300 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC-300 can be added at the batching plant and the remaining fifty percent at site just before pouring.
||Straw Coloured Liquid
||+ 5°C Material can be reconstituted by agitating at 30°C
Perma Plast PC-300 is a high range plasticizing and slum retaining admixture.
Perma Plast PC-300 is available in 25 kg, 100 kg and 200 kg drum.
HEALTH AND SAFETY
Perma Plast PC-300 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.
Perma Plast PC-300 has a shelf life of 24 months if stored in manufacturers original drums. Perma Plast PC-300 should be stored in a place where temperature does not drop below + 5°C. If the product is frozen, thaw at + 30°C and agitate until completely reconstituted. Shake well before use.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.