Perma Rapid Repair is a free flowing fine powder designed to achieve a quick repair system for concrete structures. The product achieves very high strength within minutes.
Perma Rapid Repair is composed of a blend of portland cements and sands.
Perma Rapid Repair is suitable in the following areas:
To repair edges of columns and beams damaged during deshuttering.
To repair ceiling concrete damaged while deshuttering.
To repair edges at doors and windows.
To repair general honeycombs.
Perma Rapid Repair becomes hard and achieves high strengths within minutes of repair.
It is non shrink.
It is easy to use.
It is economical to use.
Replaces costly phenolic resin system.
DIRECTIONS FOR USE
Mix small quantity of Perma Rapid Repair powder with water. Quantity should be just enough for consumption within minutes or else it will set in the pan itself. Select water quantity such that the mix is just workable, neither too stiff nor a slurry. Using a spatula or a small trowel apply the dough of Perma Rapid Repair and shape it from the edge immediately.
After the material has sufficiently hardened i.e. after two or three hours, moisture cure the repaired area.
Areas repaired with Perma Rapid Repair are suitable for subsequent decorative finishes and can be painted over.
||Free flowing light coloured powder
||3 to 5 minutes
HEALTH AND SAFETY
Perma Rapid Repair is NON toxic and safe to handle. Use dust masks and hand gloves while using the product.
Perma Rapid Repair is available in 10 kg and 25 kg packing.
Perma Rapid Repair has a shelf life of 12 Months from the date of manufacture if stored in original packing.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.