Protective Coating For Pavers
Perma Paver Coat-WD is a milky white liquid which when applied neat or diluted on to a clean and dry paver, cement tile or stone surfaces gets absorbed deep inside and forms a protective barrier on the surface. It improves the aesthetic look of the surface by imparting gloss or semi gloss to the treated surface. It makes the treated surface resistant to staining and chemical attacks. It binds the surface particles to make the wearing surface strong.
Perma Paver Coat-WD is a milky white liquid based on acrylic copolymers and surface active agents.
Perma Paver Coat-WD penetrates the capillary structure and provides for a tough, clear protection films. Perma Paver Coat-WD on curing forms a glossy film. Perma Paver Coat-WD is resistant to oil, grease and stains. Perma Paver Coat-WD can be applied by even unskilled labourers.
Perma Paver Coat-WD can be used for paver blocks, interlocking pavers, natural stone and slate.
DIRECTIONS FOR USE
Petma Paver Coat-WD can be applied with a hard sponge or a soft brush. One coat will seal, protect and make surface dust free.
Additional coats .will enhance gloss. Apply second coat after the first coat has dried off. Curing: Perma Paver Coat-WD will dry to tack free within 5 to 10 minutes depending upon temperature and ventilation.
||0°C to 60°C
||1.02 at 20°C
||40% _+ 1
Perma Paver Coat-WD gives a coverage of 80 to 100 sq. ft. per ltr for single coat. Normally two coats recommended.
Perma Paver Coat-WD is available in 10 Itr, 25 Itr and 100 Itr HDPE Drums.
Perma Paver Coat-WD has best results if use before 24 Months from the date of manufacturer and if kept in unopened condition.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.