Water Proofing Products
Perma Damp Guard- EP is a two component water based epoxy coating product highly useful in arresting leakages in walls, ceiling, RCC structures and rising dampness in internal walls. It is a user friendly and easy to use. The coated area exhibits Hydrophobic characteristics.
Highly effective in arresting rising dampness.
Waterproofing of RCC structures, water tanks and swimming pools etc.
Walls and ceiling waterproofing.
Waterproofing of toilets, lift pits, kitchen.
Primer for paint on internal and external surfaces.
Waterproofing of hygienic structures like hospitals, pharmaceutical and food processing industries and hatcheries.
Based on water dispersible epoxy hence can be diluted and washed away with water.
It is economical when compared with conventional epoxies.
It is water based hence zero VOC and is environment friendly.
The film formed is tough and has strong adhesion to all building materials.
DIRECTIONS FOR USE
Remove the plaster from the leaky surface and clean the area to remove all dust, dirt and deleterious materials. For treating a crack chase the crack into a V shaped groove about 10 mm wide and 5 mm deep.
Brush apply one coat of primer prepared by mixing one part base one part reactor and one part water to the surface to be treated or the sides of the crack to be treated and allow it to dry for 6 to 8 hours.
Mix the base and the reactor components in equal proportion and add white cement and mix it thoroughly to obtain a neat soft consistency paste. Apply this paste to fill the crack completely and evenly. Allow this paste to cure fully for 24 hours before subsequent treatment.
After the primer has dried, mix base and reactor components of Damp Guard-EP and water in the proportion of 1 : 1 : 1 to obtain a uniform consistency and brush apply this onto the primed surface evenly to cover the surface effectively. In demanding situations apply two or more coats. Allow this to dry for 24 hours before application of cement sand render.
||Two component water dispersible epoxy
||1 : 1 : 1 Base : Reactor : Water
||60 minutes at 30°C
||6 To 8 Hours
Perma Damp Guard- EP when applied as a coating gives a coverage of 40 sq. ft. per kg per coat.
Perma Damp Guard- EP is available in 1 Kg, 2 Kg and 20 Kg packing.
Perma Damp Guard- EP has a shelf life of 12 months from the date of manufacture if stored in a cool and dry place.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.