Accelerating Mortar Admixtures
Perma Plug is a quick setting cement sand mortar supplied in dry powder form. This constitutes a blend of cements, graded sand and chemical set control agents. The product needs only on site addition of required amount of water just before its use.
Heavy duty Plugging: Perma Plug is suitable for plugging of prestressing/post tensioning holes or depressions in the pipes, sleepers or girders.
Repairs of Buildings: Repairs to corners and edges of high strength concrete structures and general repairs in the building industry.
Plugging Running Leaks: Perma Plug is used to stop leakages from water tanks and leaky basements because of its quick setting property.
Sealing Joints: Perma Plug can be effectively used for filling joints, pointing brick stone masonry and waterproofing.
Easy to Use: Perma Plug is supplied in powder from. It only needs addition of water before use.
Rapid Setting: Rapid setting property of this prodct makes it useful in stopping running water.
High strength: Perma Plug hardens to high strength which is comparable to the strength of the member under repair in hours only.
Compatibility: Perma Plug is highly compatible for use with all cementitious materials, stone, brick, steel etc.
DIRECTIONS FOR USE
Clean the surface to be treated as per normal surface preparation methods for concrete- removing loose particles & deleterious materials etc.
Damp down the surface.
Mix Perma Plug and water in the proportion of 3 volumes of powder to 1 volume of water and mix to obtain a stiff consistency paste.
Press in position or trowel the paste to the finishing level and cure normally.
||Grey/Off White Powder
|Initial Setting Time
||1.5 minutes at 20°C
One kg powder will give an yield of 550 cc plugging mortar.
Perma Plug is available in 1 kg, 10 kg and 25 kg packings.
Perma Plug has a shelf life of 12 months from the date of manufacture. Store in a cool and dry condition away from moisture.
HEALTH AND SAFETY
Perma Plug is generally nontoxic, but it is advised that workers use gloves and avoid contact with skin. Accidental splashes of the powder on skin or eyes should be immediately washed with plenty of clean water. In the event of prolonged irritation seek medical advice.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.