Elastomeric Wall Coatings
Perma Wall Guard is an environment friendly acrylic protective coating for external walls which protects walls from algae, fungus, polluting atmosphere and makes them waterproof. The product is available in limited shades which are totally alkali stable and resistant to UV and IR rays. The product is highly elastomeric and allows the concrete surface to breathe normally.
Perma Wall Guard is used to provide a waterproof & weatherproof coating for the external RCC wall as well as masonry walls.
Perma Wall Guard is applied to external surfaces to make them resistant to algae, fungus, carbonation, UV and IR rays from the Sun.
Perma Wall Guard is used to make the external colored finish long lasting.
For waterproofing of terraces and sloping roofs please refer to literatures of our specialized products for this purpose, i.e. PERMA GUARD and PERMA EAZEE COAT.
Perma Wall Guard is water based, hence easy to apply with brush, roller or airless spray and is non-toxic and environment friendly.
Perma Wall Guard can be built up to thicknesses and with proper rollers architectural texture finishes can be achieved.
Perma Wall Guard makes the surfaces algae and fungus free and protects the RCC walls from carbonation attacks.
Perma Wall Guard is ideal for both RCC walls as well as masonry walls.
Perma Wall Guard can be applied on damp surfaces.
Perma Wall Guard is alkali stable and resistant to UV and IR rays from the sun.
DIRECTION FOR USE
Primer: Clean the surface thoroughly with water to remove all loose particles. Apply a coat of Perma Multi Prime. After 8 to 12 hours of the primer coat apply Perma Wall Guard.
Perma Wall Guard shall be applied in two coats at intervals of 12 to 24 hours between coats with a painters brush or suitable rollers.
Clean the surface with pressure jet of water to remove all loose material. Thoroughly clean and remove mould release oil etc. from the RCC surfaces. Repair all cracks by widening into “V” shaped groove and filling them with PERMA ACRISEAL / PERMA CRACK FILL
||Single Component Coating
||Touch Dry in 30 minutes.
|Coating Time On Primer
||With in 12 Hours
||5 to 40°C
||-40 to 80°C
Primer: Perma Multi Prime gives a coverage of 4 to 6 sq./mtr. /ltr.
Coating: Perma Wall Guard gives coverage of 15 to 20 square feet per kg depending upon the type of surface at a DFT of 400 microns in 2 coats.The coverage can be stretched multifold by dilution with water and without making any difference in the visual effect but in such cases the claimed property of the product will be lost.
Perma Wall Guard is available in 1.5 kg, 5 kg, 15 kg and 50 kg packs.
Perma Wall Guard has a shelf life of 24 months if stored in manufacturer’s original packing in a cool and dry place away from direct sunlight.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.