img

our product

MARBLE & GRANITE PROTECTOR
img
Perma Marbolite EP

LOW VISCOSITY CLEAR EPOXY COMPOUND FOR MARBLE SURFACE GROUTING AND FILLING

Marble Fixing Tile Grout

DESCRIPTION

Perma Marbolite EP is a two component very clear and very low viscosity epoxy system for use in grouting cracks and pin holes in stone surfaces before grinding and polishing. The product is especially suited for white and premium marbles and precious stones as the product is very clear and is of low viscosity which gives a fine lusture to the precious stones.
Marble Fixing Tile Grout

ADVANTAGES

  • Perma Marbolite EP is clear and hence does not interfere with the natural shades and textures of the stones.
  • Perma Marbolite EP has very low viscosity hence helpful in penetrating into the stone surface and filling up all pin holes and cracks.
  • Perma Marbolite EP is epoxy based hence helps in achieving high early and final strengths and allows early grinding and polishing of the stones.
  • Perma Marbolite EP is UV resisting and hence does not yellow on exposure to sunlight.
  • Perma Marbolite EP gives a good shine and lusture to the stone surface enhancing its beauty multifold.

DIRECTIONS FOR USE

  • Clean the stone surface to be grouted and lay it horizontally. Ensure that the surface is free from moisture and stains.
  • Mix part A and part B of Perma Marbolite EP thoroughly using a mechanical stirrer and pour the resultant liquid on to the stone surface.
  • Using a spatula or a rubber scrapper work well the Perma Marbolite EP liquid into Marble or the stone surface and remove the excess material from the surface by thoroughly scraping it out.
  • Allow the surface grout to harden for 24 hours and thereafter grinding and polishing can be done as per usual practice.

PROPERTIES

PART A PART B
Colour Clear Clear
Viscosity 400 cps 100 cps
Mixing Ratio By Weight 700 gms 300 gms
Mixing Ratio By Volume 3.5 Parts 1.5 Parts
Pot Life at 30°C 45 Minutes
Setting time at 30°C 60 Minutes

 

COVERAGE

Depends upon porosity of marble.

PACKING

Perma Marbolite EP is available in 1 kg, 2kg and bulk in premeasured packs of base and reactor.

SHELF LIFE

Perma Marbolite EP has a shelf life of 12 months from the date of manufacture.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

[ X ]

Complete Solutions to the

Construction Industry




    captcha