SPECIFICATION

Perma C- POXY is a two component epoxy system for enhancing the properties of tile adhesives and tile joint fillers. Tile joint fillers of desired shade can be added to this two component product and used with ease enhancing all its properties. In demanding situations tile adhesive can be added with Perma C-POXY to enhance all its mechanical, adhesive and strength properties.

PRIMARY USES

Perma C-POXY can be added to tile joint fillers of desired shade to increase its sheen, chemical resistance and mechanical properties in tiling jobs in aesthetically demanding situations such as tiling works in airports, malls, super markets, industrial and pharmaceutical factory, laboratory, floors etc. Perma C- POXY can be used with conventional tile adhesives as well to enhance its adhesive, chemical resistance and strength properties.

DIRECTIONS FOR USE

Perma C- POXY is supplied as a two component product having a base component and a reactor component. Mix the base and the reactor component in a pan with a trowel and then add the tile joint filler of desired shade.Take 150 gms base & 150 gms reactor in a pan. Mix thoroughly and add 500 gms of Perma C-Tone Filler or Perma R-Tone Filler or any tile joint filler to make an epoxy tile joint filler. The colour of Perma C- POXY may slightly alter the colour of the joint filler, because of its own light colour, hence trials should be done to ensure the desired shade before application.

Before application, ensure that the joint is clean and free from dirt, oily or greasy substances. Mix the tile joint filler with Perma C- POXY into a paste and apply it into the joint and finish with a spatula. Excess material fallen on the tile can be cleaned with a wet cloth before it sets. If the grouting job is done on rough stone or with slabs with uneven edges it is advisable to use a masking tape on the edges to avoid staining as it become difficult cleaning thereafter. It is recommended that the tile grouting job is taken up 72 hours after laying of the tiles. For fixing of tiles mix the two components of Perma C- POXY in a pan and add cementitious tile adhesive powder to it. Mix thoroughly to get an even consistency paste. Use this paste as per normal practice for fixing the tiles.

PROPERTIES

COVERAGE

The coverage will be as per the specification of the tile grout or tile adhesive manufacturers. 600 gms of Perma C- POXY is required for mixing 1 kg of tile adhesive or tile grout and 300 gms of Perma C-Poxy will be required for mixing 500 gms of tile adhesive or tile grout.

PACKING

Perma C – POXY is available in 300 gms and 600 gms pack.

SHELF LIFE

Perma C- POXY has a shelf life of 12 months if stored in manufacturer’s original packing in cool and dry place away from moisture and heat.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.