our product

Perma Clear Bond



ASTM C881 Type2, Class B and C

Perma Clear Bond is a permanent epoxy adhesive for internal or external bonding tiles, stone, marble, granite etc with concrete. The ultimate bond strength is greater than the tensile strength of concrete. Perma Clear Bond does not shrink and provides an even and stress free bond.
Perma Clear Bond


Perma Clear Bond may be applied to clean, sound and durable surface, i.e. glazed tiles and bricks, ceramic and quarry tiles, terrazzo tiles and floors, old and worn concrete, engineering and semi-engineering bricks, marble, granite etc. Perma Master Bond Clear is used for surface grouting of porous marble and granite before polishing.


  • High strength.
  • Non shrink.
  • Durable
  • Resistant to chemical attack.
  • Supplied in pre-weighed units.
  • Solventless epoxy


All surface must be thoroughly cleaned and prepared. All loose particles, laitence, dust, oil, grease, fat, bitumen and paint must be removed if good bond strength is to be achieved. Gloss surfaces must be abraded.

If oil or grease are present, scrub surface with hot detergent water and rinse thoroughly. Visible signs of mould growth, lichen, or algae, should be removed and treated with a fungicidal wash. The surface should be made dry before application.

Carefully transfer the entire contents of the smaller container of REACTOR COMPONENT to the larger BASE COMPONENT and mix thoroughly, using a stout, palette knife or a slow running drill with a paint mixing paddle until uniformity is achieved. This normally takes five minutes.

Guide to Application:
The material is ready to use within 3 to 4 minutes after mixing. As the pot life is limited work should proceed quickly. Perma Master Bond Clear should be applied evenly across the whole surface with a clean, short haired paint brush. The contents of the can must be used within 45 minutes of mixing.


Part A Part B
Color Clear Clear
Viscosity 400 cps 50 cps
Mixing ratio by weight 700 gm 300 gm
Mixing ratio by volume 2 1
Pot life at 30°C 35 to 40 minutes
Setting time at 30°C 60 minutes



Perma Clear Bond gives a coverage of 30 to 40 sq. ft. per kg.


Perma Clear Bond should be handled carefully. Use of mask and hand gloves recommended.


Perma Clear Bond is supplied in 1 kg pack & Bulk Packing.


Perma Clear Bond has a shelf life of 12 months from the date of manufacturing if stored in original packing.


PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

[ X ]

Complete Solutions to the

Construction Industry