img

our product

CONSTRUCTION CHEMICALS
img
Perma Grout-60 SPL

A FREE FLOWING NON SHRINK HIGH STRENGTH GROUT

DESCRIPTION

Perma Grout — 60 SPL is a free flowing, non shrink high strength grout mix, supplied in grey powder form which needs only on site addition of water to form a ready to use grout slurry.

PRIMARY USES

Perma Grout — 60 SPL is used for:

Grouting heavy machine foundations which are subjected to huge dynamic loads.
Grouting underneath base plates of machines.
Grouting of columns/stanchion foundations.
Grouting of crane rails, anchor bolts, dowel bars etc.

DIRECTIONS FOR USE

Clean the foundation surfaces to be grouted so that they are free from dust, dirt, oil, grease, curing compound, paint etc.
Make the surface wet and avoid stagnation of water in the recesses.
Mix Perma Grout — 60 SPL with water as per the ratios mentioned with properties above to form a smooth consistency mortar or slurry. Lower the water content higher will be the strength.
Pour Perma Grout — 60 SPL mortar or slurry in the pocket or recess to be grouted. After initial hardening cure by placing wet hessian over it.

PROPERTIES

Physical Form : Grey Powder
Max. Particle Size Water Addition For : 1.8 mm
Flowable Consistency Water Addition For : 150 to 170 ml/kg
Plastic Consistency : 160 to 180 ml/kg
Free Expansion : 4%
Restrained Expansion : Greater than zero but less than 0.2%
Yield : 13.5 Litres Per 25 kg Sack

 

PACKING

Perma Grout — 60 SPL is available in 10 kg, 25 kg and 50 kg lined HDPE sack.

SHELF LIFE

Perma Grout — 60 SPL has a shelf life of 12 months if stored in original packing and kept away from moisture. Store in a cool and dry place.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

[ X ]

Complete Solutions to the

Construction Industry




    captcha