DESCRIPTION

Perma Master Fill-EP is a two component filled epoxy system which needs mixing of the two components thoroughly to produce a knifing putty. Perma Master Fill-EP is suitable for filling fine cracks, depressions on the surface and repairing honeycombs in the concrete to make it fair faced and suitable for subsequent coating. Perma Master Fill-EP is solvent free and chemical resistant.

PRIMARY USES

• For repairing surface blemishes.
• For filling cracks.
• For smoothening concrete as well as metal surfaces before painting.

GUIDE TO APPLICATION

On the prepared surface wherever crack filling and evening out is required, prime the surface with Perma Master Prime-CN. Mix Base and reactor components of Perma Master Fill-EP in equal proportions till a homogenous uniform colored paste is obtained. Apply this paste over the primed areas and tool it with spatula or Putty blades. If the consistency of the putty is desired to be more workable then add a small quantity of mixed Perma Master Prime-CN to the Perma Master Fill-EP and mix.

ADVANTAGES

• Non-toxic. Can be mixed by hand.
• Durable.
• Solvent free.
• Easy to use. Requires two components to be mixed in equal proportions.
• Chemical resistant.
• Easily applied by putty blades or metal floats.
• Non Slump, can be easily applied on vertical surfaces.
• Reduces usage of subsequent coatings.
• Cures without shrinkage.
• Color matched to parent concrete.

PROPERTIES

EQUIPMENT CARE

All equipment must be cleaned immediately after use with cleaning solvents. Similar procedures should be adopted for break periods exceeding fifteen minutes.

COVERAGE

Depends upon application. Perma Master Fill-EP fills 5 mm wide groove to a length of 60 running meter.

HEALTH AND SAFETY

Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day’s work all the packing material should be burnt and buried.

PACKING

Perma Master Fill-EP is available in 1 kg Packing.

SHELF LINE

Perma Master Fill-EP has a shelf life of 12 months from the date of manufacture.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.