our product
EPOXY BASED NON SLUMP STRUCTURAL REPAIR SYSTEM
DESCRIPTION
Perma Master Patch-NS is a high performance epoxy resin based structural repair system that provides a smooth finish to the repaired areas. Perma Master Patch —NS is a two component product based on epoxy Base and Hardener which needs only on site addition of quartz ball Mill powder or silica flour to produce a non slump paste which is used for repairing beam and column edges and spalled / honeycombed concrete.
ADVANTAGES
DIRECTIONS FOR USE
Surface Preparation:
As with all epoxy resin systems, surface preparation is of prime importance. For concrete surfaces, remove all grease, oil, dust, laitance etc. Ensure substrate to receive the screed is sound, cut back to sound surface wherever necessary.
Priming:
Remove dust and ensure the surface is dry. Prime with Perma Master Prime-CN / Perma Master Bond.
Mixing:
Mix in a suitable pan type of a mixer consisting of 720 gms Base and 280 gms of Reactor components and to this add and mix 2 Kg quartz ball mill powder and quartz sand 30/80 in 1:1 proportion. Mix in a suitable pan type of a mixer.
Application:
Perma Master Patch-NS mortar thus prepared looks like a stiff paste. Apply the mixed Master Patch-NS mortar onto the primed surface while it is still tacky, and feather edge it to restore the original shape of the structural member.
COVERAGE
A mix of 1 kg of base & reactor with 2 Kg of quartz mix (i.e. 1 kg of ball mill powder and 1 kg of 30/80 quartz sand) gives an epoxy non slump mortar of 1.5 litres. This covers an area of about 5 Sq. ft. if applied to a thickness of 3 mm.
HEALTH AND SAFETY
Epoxy products generally cause irritation to the skin, Use of hand gloves by the workers is advised. Upon completion of day’s work all the packing materials should be burnt and buried.
PACKING
Perma Master Patch-NS is available in 250 gms and 1 kg pre weighed units and in bulk.
SHELF LIFE
Perma Master Patch-NS has a shelf life of 12 months from the date of manufacture.
DISCLAIMER
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.