BS 5980:1980, Draft CEN:prEN 12004 -1997
Perma Non Slip Adhesive is a cementitious polymer based material in powder form, which only needs on site addition of water to make a paste which is used for fixing tiles over existing mosaic tiles without removing them. Perma Non Slip Adhesive is also used for fixing tiles on difficult surfaces.
Perma Non Slip Adhesive is mainly used for fixing glazed, ceramic, terracotta tiles, vitreous tiles, marble and granite tiles on existing mosaic or ceramic floor tiles without removing them or hacking them. Perma Non Slip Adhesive is also used for tiling on difficult vertical cementitious surfaces and in cases where the weight of the tile is more than the normal ones.
DIRECTIONS FOR USE
Ensure that the surface to be tiled is clean and free from dust, dirt, grease etc. Mix Perma Non Slip Adhesive with clean water in the proportion of 3.5 volumes of powder to 1 volume of water. Mix till a uniform consistency, smooth paste is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any, to escape and remix the paste. Apply the paste uniformly on to the surface to be tiled as well as on the back of the tile and press the tiles in position. While using Perma Non Slip Adhesive wetting of the tiles or the surface to be tiled or curing is not required. Fill the tile joints with Perma C-Tone Filler after 24 hours of tile laying.
Can be used for fixing tile over tile.
No need to break or hack the existing tiles.
No wetting of surface to be tiled.
Makes the tiled area waterproof.
Holds the tile even at high temperatures.
Single component hence easy to use.
Withstands temperatures up to 200°C.
Can also be used for filling joints.
|Pot Life Of Paste
||45 min at 35°C
||Free flowing powder
One kg of Perma Non Slip Adhesive yields a paste of 600 cc. One kg of Perma Non Slip Adhesive can fix tiles on an area of 3.22 Sqft, if marble tiles are fixed with a uniform bed thickness of 2mm .
All equipment and tools must be cleaned immediately after use with water or Cleaning Solvents as the case may be. Similar procedures should be adopted for break periods exceeding 15 minutes.
Perma Non Slip Adhesive is available in 10 Kg and 25 Kg multi-wall laminated sacks.
Perma Non Slip Adhesive has a shelf life of 12 months if stored in Manufacturer’s original packing in a cool and dry place away from moisture and heat.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.