our product

Perma Plast MF



ASTM C 494 : Type A, B, & D
IS : 9103-2007


Perma Plast-MF is a superior quality super plasticiser cum water reducer based on high molecular weight sulphonated melamine formaldehyde condensate.


  • To increase the workability in concrete used In casting pre-cast units, cement tiles, colored paving blocks and for use in white cement mixes used for decorative render etc.
  • To increase the compressive strengths.
  • To bring about cement economies.
  • For hot weather concreting.
  • For Early de-shuttering of form work .


  • Perma Plast-MF is a clear to light straw colored liquid hence does not change the colour of concrete.
  • Perma Plast-MF is highly useful in pre-cast units and in tile factories.
  • Perma Plast-MF is of special advantage in Tyrolean renders and in white cement based textured coatings.
  • Perma Plast- MF is very easy to dose. The dosing quantity of the material can be added to the concrete or mortar mix at any stage of mixing.


Perma Plast-MF should be added to the concrete / mortar / cement paste mix during the mixing cycle at the same time as the water is added. Avoid adding Perma Plast- MF directly to the dry cement.


Perma Plast MF is a powerful Plasticiser which disperses and deflocculates the cement particles within cement concrete / mortar or in paste. It is used in increasing the workability of mix without addition of excess water or to allow reduction in free water content of the mix to achieve superior strength without in any way affecting the colour of the mix or the end product .


Field trials should be conducted to determine the optimum dosage of Perma Plast MF for each application. However a dosage range of 200 gms 500 gms per 50 kg bag of cement can be recommended as an initial starting point for the field trials.


Typical properties of Perma Plast- MF are as follows :

Form : Clear / light straw Coloured Liquid
Specific Gravity : 1.18 at 25°C
Ph : 7 ± 0.5
Air Entrainment : Nil
Chloride content : Nil
Nitrates : Nil



Perma Plast-MF is available in 25 Kg, 100 kg, and 230 kg Packs.


Perma Plast MF has a shelf life of 24 months if stored in manufacturer’s original packing in a cool and dry place away from moisture and heat.


PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

[ X ]

Complete Solutions to the

Construction Industry