our product

Perma Plast-O- Care



Perma Plast-O-Care is a easy to use Skim Coat in powder form available in white color and is based on white cement, selected polymers and fillers. It is a water resistant plaster applied to a maximum of 1 to 2 mm thickness per coat.


For creation of smooth even surface for application of paint to the walls and ceiling. It can be used on plasters, RCC or brick or block work directly.


  • Clean the surface to remove dirt, dust, laitance, oil, grease etc. Dampen concrete or the plastered surface before application.
  • If the plastered surface has pores treat surface with SBR diluted 1 : 1 with water so that all the pores are primed and then apply Plast-O-Care made to a flowing consistency so that all the pores get filled up and then apply Plast-O-Care.
  • Mix 350 to 390 ml of clean water to 1 kg Plast-O-Care. Mix thoroughly and keep it for 5 to 10 minutes and remix to obtain an even consistency creamy paste. Apply this paste on the plaster or concrete surface with spatula or putty blade. If there is a need to build up thickness it can be applied in layers taking care to see that the first layer has dried before the second layer is applied.


Form : Fine Powder
Colour : White
Binder : Cement
Fillers : Selected mineral fillers.
Maximum Aggregate Size : 500 micron
Bulk Density : 1. 05
Plastic Density : 2. 0
Yield : 700 ml / kg.
Water Requirement : 350 to 390 ml / kg
Pot Life : 3 hours
Coverage : 1.2 kg / m² / mm
Adhesion To Concrete : 10 kg / cm²



Perma Plast-O-Care is available in 20 kg & 40 kg HDPE packing.


Perma Plast-O-Care has a shelf life of 12 months if stored in manufacturer’s original packing.


PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

[ X ]

Complete Solutions to the

Construction Industry