our product
WATER REDUCING, WATER PROOFING & GENERAL PURPOSE PLASTICISER FOR CONCRETE
SPECIFICATION
ASTM-C 494 | : | Types A & D |
IS | : | 9103 – 2007 |
IS | : | 2645 – 2003 |
DESCRIPTION
Perma Plast-SL is a water reducing, water proofing and general purpose plasticiser for concrete. It is based on refined ligno sulfonates.
PRIMARY USES
To increase workability.
To increase compressive strength.
To affect cement economies.
For hot weather concreting.
To waterproof concrete and plastering mortar.
TYPICAL APPLICATION
In areas of congested reinforcement where high workability is beneficial.
In pre-cast concrete manufacturing.
In concrete brick and block manufacturing.
For hot weather concreting.
ADVANTAGE
Increases workability.
Improves cohesive property in concrete.
Reduces water demand in concrete.
ACTION
Perma Plast-SL is a plasticiser which disperses and deflocculates the cement particles within a concrete mix. It can be used to improve workability without the addition of extra water or to allow reductions in free water content of the concrete mix.
DOSAGE
Field trials should be conducted to determine the optimum addition rates of Perma Plast-SL. A dosage range of 200 gms to 500 gms is ideal for general purpose concreting. For waterproofing the dosage recommended is 100 gms per 50 kg bag of cement.
DIRECTION FOR USE
Perma Plast-SL should be added to the concrete mix during the mixing cycle at the same time as water. Never add Perma Plast-SL to dry cement.
PROPERTIES
Typical properties of Perma Plast-SL are as follows:
Colour | : | Dark brown/black liquid |
Specific Gravity | : | 1.15 at 25°C |
Air Entrainment | : | 1% maximum dependent on grading of sand and water content. |
Chloride Content | : | Free from added chlorides |
Nitrate Content | : | Nil |
COMPOSITION
A liquid admixture based upon refined ligno sulfonates.
HEALTH AND SAFETY
Perma Plast-SL is not a health hazard or fire risk. spillages should be washed immediately to avoid possibilities of slipping.
PACKING
Perma Plast-SL is available in 200 gms, 500 gms, 1 kg, 5 kg, 10 kg, 20 kg, 25 kg, 110 kg and 230 kg packing.
SHELF LIFE
Perma Plast-SL has a shelf life of 24 months if stored in manufacturer’s original packing.
DISCLAIMER
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.